Skip to main content


Surface Mount Traffic Spikes

Available in 36″, 38″ and 48″ units.

 In some gated communities, it’s common for drivers to sneak in the wrong way, damaging the gate in their attempt to enter before it closes.

Roadshark International offers a solution with our TT36, TT38 and TT48 Surface Mount Traffic Spikes.

TT stands for TigerTeeth™. Our TigerTeeth™ models are best for parking lots, gated communities, private residences and more.

TigerTeeth™ is a registered US Trademark owned by Roadshark International Inc.

The difference between our TT and SM models.

For taller blade height, check out our SM38 and SM 48 models.

Our most popular model! 
Blade height 3.75”

Item #TT36, #TT38 and #TT48
Red coverplates and heavy duty coverplates (70 ton rating) are available.

What exactly is a Surface Mount Traffic Spike?

A Surface Mount Traffic Spike is a road (vehicle) barrier that sits on the ground, forming a highly visible means of controlling traffic flow into and out of an area. Our TT barriers are available in 36, 38 and 48-inch segments, and tear into tires to prevent vehicles from passing.

One-way traffic spike systems work great at arenas, state parks, schools, and other areas where one-way traffic control is needed; the barrier is excellent for unmanned areas. They can reduce manpower costs significantly. 

What are some benefits of Roadshark’s Surface Mount Traffic Spikes?

  • Adjustable Blade Height and Angle

    Roadshark traffic spike barrier users can adjust the blades to be less aggressive. This allows for a “phase in” period for motorists at new installations. Customers can adjust the thickness of the internal rubber bumpers and lower the blade height if required. Patent pending.

  • Proprietary Lockdown Mechanism

    Our Proprietary Lockdown Mechanism is easy to use, and blades can be locked down in less than a minute. If Roadshark’s competitors have this type of feature, it may work in their showroom, but good luck in the corrosive, dirty environment of the real world! No special tools are required to purchase. Patent pending.

  • Reinforced Axle

    Reinforced Axles prevent blades from bending or twisting. Axles and blades are coated with high visibility yellow nylon coating (which outlives galvanizing and powder coating by 10 times). Patent pending.

  • No Rust

    No rust polyurethane coatings and stainless-steel fasteners. The top plate of Roadshark barriers is held down with stainless steel bolts that will not rust or stain the surface of the barriers. The polyurethane finish will not wear off like powder coating and reduces operating noise.

  • Adjustable Spring Tension.

    Roadshark installers can adjust the size and number of torsion springs to achieve the required tension (upward force on the blades).

  • Low Maintenance

    Roadshark barriers can go months without needing cleaning. They use one axle per unit, which reduces the number of springs needed and the amount of maintenance required. Some of Roadshark’s competitors use multiple springs for every 1 or 2 blades, which requires continuous maintenance as springs fail. Cleaning can be done in as little as 5 minutes per segment.

  • Stainless Steel Springs

    The strength and design of Roadshark’s springs result in less maintenance, with springs lasting over 100,000+ cycles. (50,000 vehicles) Springs can last several months or even years; replacement is normally done in under 10 minutes. 

  • Reduced Operating Noise and Increased Life

    Internal rubber bumpers reduce operating noise and increase the life of barrier components.

Roadshark’s barriers are built to last and will give you years of trouble-free operation. Some of their barriers currently installed in the U.S. experience over 2000 vehicles per day and are reliable where their competitors have failed.

Additional benefits and features include:

  • 2 blade heights are available, 3.75″  for parking lots with low vehicles and 4.25″ for military applications.
  • Heat Trace cables are available to keep Roadshark barriers ice-free in northern climates.
  • Speed bumps installed in front of the Roadshark equipment may be beneficial but are not mandatory.
  • The industry standard is 5 MPH, Roadshark units can easily handle speeds of 10 MPH.
  • Installation can be done in as little as 20 minutes!  Roadshark SM and TT models come with 8 predrilled mounting holes.
  • Easily installed on concrete or asphalt using our recommended installation hardware – No Epoxy glue required, even on asphalt.
  • Heavy duty cover plates with 70 ton rating is available

(SMTT38 and SMTT48 shown in photos above)

If you are searching for tiger teeth please remember that TigerTeeth™ is a registered US Trademark of Roadshark International Inc.

Contact Us For More Info and To Purchase

If you have any questions about our products or are interested in purchasing, please contact us. Most orders can ship within 24 hours.

If you are looking for parts for your existing Roadshark products, click here.